Afowoyi Dada grinder GM150 & GM200
Apejuwe
| Apejuwe | Ẹyọ | Sipesifikesonu | |
| Nkan NỌ. |
| Ọdun 121010 | Ọdun 121015 |
| Awoṣe |
| GM 150 | GM 200 |
| Awọn worktable |
| ||
| Iwọn dada Tabel (ipari * iwọn) | mm | 460*180 | 480*200 |
| Irin-ajo ti o pọju ti tabili (ipari * iwọn) | mm | 500*190 | 530*220 |
| T-Iho tabili (nọmba * iwọn) | mm | 1*14 | 1*14 |
| Lilọ ori |
|
| |
| Ijinna lati ile-iṣẹ spindle si tabili iṣẹ | mm | 335 | 450 |
| Iwọn kẹkẹ lilọ (WA46*5V) (OD* Iwọn * ID) | mm | 200*13*31.75 | |
| Lilọ kẹkẹ iyara 50hz | r/min | 2850 | |
| Lilọ kẹkẹ iyara 60hz | r/min | 3440 | |
| Inaro (oke ati isalẹ) kikọ sii kẹkẹ ọwọ |
|
| |
| fun REV.awọn handwheel | mm | 1.25 | |
| fun DIV.awọn handwheel | mm | 0.005 | |
| Agbelebu (iwaju ati ẹhin) ifunni ọwọ kẹkẹ |
|
| |
| fun REV.awọn handwheel | mm | 5 | |
| fun DIV.awọn handwheel | mm | 0.02 | |
| Agbara motor |
|
| |
| Moto Spindle | kw | 1.5 | |
| Motor tutu | w | 40 | |
| Iṣe deede |
|
| |
| Parallelism ti machined dada to mimọ dada | mm | 300: 0.004 | |
| Dada roughness | μm | Ra0.32 | |
| Net àdánù / Gross àdánù | kg | 650/750 | 750/850 |
| Iwọn gige oofa ti o yẹ (aṣayan) | mm | 400*150 | 400*200 |
| Iwọn apapọ (L*W*H) | mm | 1550*1150*1590 | 1680*1140*1760 |
| Iwọn apoti (L*W*H) | mm | 1000*1150*1760 | 1140*1250*1940 |
Standard Awọn ẹya ẹrọ
| Kẹkẹ | 1 pc |
| Kẹkẹ iwontunwonsi bar | 1 pc |
| Hoisting ṣeto | 4 pcs |
| Ọbọ spanner | 1 pc |
| kẹkẹ kẹkẹ | 1 pc |
| Wẹkẹ imura | 1pc |
| Ipele gbe ati dabaru | 1 ṣeto |
| Ọpa apoti ati ki o pataki wrench | 1 ṣeto |
| Mo itanna atupa | 1 ṣeto |
| Awọn ẹya ẹrọ iyan | |
| Yẹ oofa Chuck | 1 ṣeto |
| Akojo eruku | 1 ṣeto |
| Iduro iwontunwonsi kẹkẹ | 1 ṣeto |
| Itutu ati eruku gbigba ẹrọ | 1 ṣeto |
